Utility Aptitude Tests: EEI CAST, POSS, MASS and How to Prepare
Most US electric utilities screen line, plant, maintenance and technician applicants with Edison Electric Institute (EEI) test batteries: the CAST for line and construction trades, the POSS for plant operators, the MASS for plant maintenance, the TECH for technicians and the SO/PD II for control rooms. Each is a set of short, separately timed multiple-choice tests of math, reading and mechanical reasoning. EEI publishes no pass mark, each utility sets its own, and a miss means a published wait of anywhere from 15 days to four months before you can try again.
- 5
- main EEI batteries: CAST, POSS, MASS, TECH, SO/PD II
- 15 days to 4 months
- published waits before a retest
- None
- public pass mark for any EEI test
Last checked · From utility careers pages and EEI brochures; EEI publishes little
Start with the part most utility tests share
- 55 questions
- 25 minutes
- Score in seconds
Mechanical Concepts is in the CAST, POSS, MASS and TECH. Free 55-question mechanical-style test, scored by topic.
By the LifeScore Editorial Team · Updated · How we check facts · How the questions are made
Why does the utility aptitude test matter so much?
Because it comes before the interview and decides whether anyone reads the rest of your application. One weak section can cost you a job you may have waited months to see posted, and the published retest rules mean a wait of 15 days to four months before a second try.
Line, plant and technician jobs at a utility are sought-after trade careers, often union, and the openings do not come round often. The test is the gate. Duke Energy says you can retest only every 90 days and only after you apply to another job that needs the test. NextEra allows three tries 30 days apart and then makes you wait four months. Entergy caps you at two attempts in 12 months. Miss by a few questions and the opening you wanted may well be filled before you are allowed back in.
The good news is that these are learnable tests. The content is school math, plain reading and how simple machines behave. What beats most people is the clock: the CAST's math part is reported as 18 questions in 7 minutes, and the mechanical part in the POSS brochure is 44 questions in 20. Practise on a timer and the clock stops being the problem. And a pass keeps paying: PSEG says its results stay valid indefinitely unless the standards change, and Entergy and Arkansas Electric Cooperatives will confirm a result you earned elsewhere through EEI's Authorization to Release form.
What are the EEI tests, and how do they compare?
Five main batteries, each validated for one family of jobs, plus short tests for meter readers and customer service. They share building blocks: Mechanical Concepts appears in four of them, and math usage and reading in most. The table shows what each covers and our closest free practice.
Test numbers from SCE's study guide list; jobs from LG&E and KU, PSEG, TVA, SCE and PacifiCorp; timings from EEI brochures hosted by utilities unless marked prep sites or reported. Checked 14 November 2026. Our tests are mechanical-, IBEW- and WorkKeys-style practice, not EEI items.
CAST (Construction and Skilled Trades) · #5108
- Jobs
- Lineworker, underground and substation work, meter service and repair, mechanics
- Parts
- Graphic Arithmetic, Mathematical Usage, Mechanical Concepts, Reading for Comprehension
- Timing
- Each part on its own clock: 16 questions in 30 min, 32 in 30 min (brochure); math 18 in 7 min (prep sites)
- Closest free practice here
- Mechanical, IBEW-style math and reading, WorkKeys Graphic Literacy
POSS (Plant Operator Selection System) · #5100
- Jobs
- Fossil, nuclear and hydro plant operators; compressor station operators
- Parts
- EEI's guide: five short tests. Reported: reading, math usage, mechanical concepts, figural reasoning
- Timing
- About two hours; mechanical 44 in 20 min; math 18 in 7 min or 20 in 10 min (brochure)
- Closest free practice here
- Mechanical, abstract reasoning, IBEW-style math
MASS (Power Plant Maintenance Positions) · #5105
- Jobs
- Plant mechanic, electrician, instrumentation (I&C), welder, gas system maintenance
- Parts
- Assembling objects, mechanical principles, reading comprehension, basic math
- Timing
- About two hours in all (brochure); assembling objects 20 in 15 min (prep sites; one says 10)
- Closest free practice here
- Mechanical, spatial reasoning (partial), IBEW-style math and reading
TECH (Technician Occupations) · #5107
- Jobs
- Lab and chemistry, telecom, engineering design, drafting, GIS, test and relay technicians
- Parts
- Graphic Problem Solving, Interpreting Diagrams, Mechanical Concepts, Reasoning from Rules
- Timing
- Mechanical Concepts 20 min (brochure); whole test about an hour (prep sites)
- Closest free practice here
- WorkKeys Graphic Literacy, mechanical, Workplace Documents
SO/PD II (System Operator / Power Dispatching) · #5209
- Jobs
- System operator, system controller, power dispatcher, gas controller
- Parts
- Analytic Thinking Skills, Mathematical Usage, Reading Comprehension; result Recommended or Not Recommended
- Timing
- About two and a half hours, on computer (reported)
- Closest free practice here
- IBEW-style math and reading. No match for Analytic Thinking
Meter reader test (MRAB)
- Jobs
- Meter reader
- Parts
- Coding and reading tables (reported)
- Timing
- Under 20 minutes (prep sites)
- Closest free practice here
- WorkKeys Graphic Literacy for the tables
Electrical aptitude test (NJATC / electrical training ALLIANCE, not EEI)
- Jobs
- Union lineman, estimator and meter technician apprenticeships; TVA groundman trainee
- Parts
- Algebra and functions, reading comprehension
- Timing
- Stanine 1 to 9; PacifiCorp requires 5 to 7 by craft; retake every 91 days
- Closest free practice here
- IBEW-style test, on the same two parts
Which utility test will I get for my job?
The job family decides it. Line and field trades usually get the CAST, plant operators the POSS, plant maintenance the MASS, associate-degree technicians the TECH and control-room staff the SO/PD II. Union lineman apprenticeships use the NJATC test instead. Your posting or invitation names the battery; if it does not, ask.
| If you applied for | You will usually sit | Who says so |
|---|---|---|
| Lineworker, line apprentice, groundman (hired by the utility) | CAST at many utilities. Duke Energy uses its own Virtual Assessment for Lineworkers; AEP lists a HireVue assessment | PSEG, SCE (CAST #5108), LG&E and KU; Duke; AEP |
| Lineman apprentice through a union JATC | The NJATC electrical aptitude test (algebra and reading), not an EEI test | PacifiCorp; TVA uses the electrical training ALLIANCE test for Groundman Trainee |
| Underground technician, substation mechanic, meter service and repair, automotive or division mechanic | CAST | PSEG, LG&E and KU |
| Power plant operator, auxiliary operator, compressor station operator | POSS | LG&E and KU, TVA (Student Generating Plant Operator), PSEG |
| Plant mechanic, electrician, I&C technician, welder, nuclear maintenance | MASS | LG&E and KU, TVA (technician trainees), PSEG; MASS named on NextEra and Dominion job postings |
| Lab, chemistry, telecom, drafting, GIS, test and relay technician | TECH | LG&E and KU, CenterPoint; TECH named on some Dominion postings |
| System operator, dispatcher, gas controller | SO/PD II | SCE (#5209), Duke, CenterPoint |
| Meter reader | A short meter reader test (MRAB) | NextEra and Duke list a meter reader test |
| Customer service representative | An EEI customer service test (SCE lists #5306; Duke lists a CSR test) | SCE, Duke. We have no practice for this one |
Con Edison: we could not find a Con Edison page that names an EEI battery. A Con Edison careers presentation says entry roles such as General Utility Worker may require general aptitude, job-specific aptitude, driving and physical tests, and a 2016 Con Edison guide describes "aptitude placement exercises" in four to six sections. Prepare with the same building blocks below, and ask the recruiter which test your posting uses.
AEP lists EEI-based preparation for roles such as Instrument and Controls Technician and Radiation Protection Technician at its Cook nuclear plant, and a separate HireVue assessment for lineworker, dispatcher, meter servicer and system operator roles. Dominion Energy says it uses the EEI battery for craft, skilled trades and technical jobs, given on site at Talogy testing centres, and only after you apply and are selected.
What is on the EEI CAST?
Four separately timed tests: Graphic Arithmetic, Mathematical Usage, Mechanical Concepts and Reading for Comprehension. The brochure gives 16 questions in 30 minutes for Graphic Arithmetic and 32 in 30 for reading; prep sites give 18 math questions in 7 minutes. Spare time in one part never carries over.
| Jobs | Lineman, underground technician, division and automotive mechanic, substation mechanic (PSEG); electric transmission and distribution, substation, facilities, meter service and repair (LG&E and KU)ReportedLG&E and KU careers, "Pre-employment testing" (which EEI test for which job) |
|---|---|
| Graphic Arithmetic | 16 questions, 30 minutes: arithmetic on numbers read off drawingsReportedEEI CAST test brochure, hosted by PSEG |
| Mathematical Usage | 18 questions, 7 minutes (about 23 seconds each)ReportedJobTestPrep, "CAST test" (prep site: Mathematical Usage timing) |
| Mechanical Concepts | 20-minute limit in the brochure; 44 questions reportedReportedEEI CAST test brochure, hosted by PSEG |
| Reading for Comprehension | 32 questions, 30 minutesReportedEEI CAST test brochure, hosted by PSEG |
| CAST-R | A revised version some utilities use: EEI's 2020 brochure calls it aptitude and behavioral tests, about two hours, with a calculator permittedReportedSouthern Company Get Into Energy, EEI CAST-R student guide (PDF) |
| Calculator (original CAST) | Not settled by the sources we found; prep sites disagree. Practise without oneReported |
| Pass mark | Not published. Prep sites describe a combined index from 1 to 10 read against the utility's own cut-offReported |
The four clocks change how you pace. Finishing reading early buys nothing on mechanical; each part is its own race. Math Usage is the sprint, so fractions, percents and simple equations need to be automatic. Graphic Arithmetic is the slow one: most lost marks come from reading the wrong value off the picture. Our lineworker CAST guide walks through each part with a pace for each.
Practise: the mechanical-style test for Mechanical Concepts, the algebra and reading parts of the IBEW-style test for math and reading (no calculator, on a clock), and WorkKeys Graphic Literacy for pulling one number out of a busy figure.
What is on the EEI POSS?
The Plant Operator Selection System, test #5100, is what EEI's own guide calls five short aptitude tests for fossil, nuclear and hydro plant operators, in about two hours. The brochure gives Mechanical Concepts as 44 items in 20 minutes and Mathematical Usage as 18 in 7 or 20 in 10. Candidates also report a Figural Reasoning part.
| Jobs | Operating power plants and compressor stations (LG&E and KU); Student Generating Plant Operator (TVA); technical operator (PSEG)ReportedLG&E and KU careers, "Pre-employment testing" (which EEI test for which job) |
|---|---|
| Structure | Five short aptitude tests (EEI guide #5100); recent candidates report fourReportedEEI POSS test brochure, hosted by PSEG |
| Mechanical Concepts | 44 items, 20 minutesReportedEEI POSS test brochure, hosted by PSEG |
| Mathematical Usage | 18 questions in 7 minutes, or a longer 20 in 10 minutesReportedEEI POSS test brochure, hosted by PSEG |
| Other parts | Reading comprehension and figural reasoning, as prep sites and candidates reportReported |
| Length | About two hours to administerReportedEEI POSS test brochure, hosted by PSEG |
| Calculator | TVA says calculators are provided for its POSS and MASS sessionsReportedTVA careers, "Selection testing for operations and maintenance training" |
TVA describes the math as arithmetic, basic algebra and basic geometry, and the mechanical part as mechanical principles including force, mechanical advantage and gears. Figural Reasoning, shape series and patterns, is the part general trades prep skips; give it a week of short sets on our abstract reasoning test. More on the operator battery in our power plant operator test guide.
Mechanical Concepts is in four EEI tests. Make it your strongest part
8 timed mechanical-style mocks and 16 topic drills, so levers, gears and pulleys take seconds, not minutes.
The Mechanical Pass Pack gives you 8 full mocks on the real clock, 16 drills of 12 questions for the sections that cost you points, and a predictor that turns your mocks into the odds of reaching the target score you set. One payment, no subscription, and your free score stays free.
Mechanical-style practice written by LifeScore, not EEI items. It covers the mechanical part of the CAST, POSS, MASS and TECH, not their math or reading.
Prep courses for these tests usually cost $19 to $129. The Mechanical Pass Pack is US$39 (£29), once.
- 8
- timed mocks
- 16
- topic drills
- 1
- score predictor
What is on the EEI MASS?
The Power Plant Maintenance Positions Selection System is for plant mechanics, electricians, instrumentation technicians, welders and gas system maintenance. LG&E and KU say it measures assembling objects, mechanical principles, reading comprehension and basic math, and the brochure gives about two hours to administer.
| Jobs | Plant mechanic, instrumentation specialist, electrician, welder, gas system maintenance (LG&E and KU); nuclear worker and nuclear technician (PSEG); technician trainees (TVA)ReportedLG&E and KU careers, "Pre-employment testing" (which EEI test for which job) |
|---|---|
| Parts | Assembling objects, mechanical principles, reading comprehension, basic mathReportedLG&E and KU careers, "Pre-employment testing" (which EEI test for which job) |
| Length | About two hours to administerReportedEEI MASS test brochure, hosted by LG&E and KU (PDF) |
| Assembling Objects | 20 questions in 15 minutes on most prep sites; one study guide says 10 minutesReportedJobTestPrep, "EEI MASS test" (prep site: section counts and times) |
| Job postings | NextEra (Seabrook I&C technician, electrician) and Dominion (electrician) postings name the MASSReported |
Assembling Objects asks which set of pieces makes a shape, or how parts join. We do not have that item type; our spatial reasoning test trains the related skill of turning a shape in your head, so treat it as partial. Spend most of your time on the mechanical part, which is the largest shared section, and on math without hesitation.
What is on the EEI TECH test?
The Technician Occupations Selection System, test #5107, is for technician jobs that normally need an associate degree. Its four parts are Graphic Problem Solving, Interpreting Diagrams, Mechanical Concepts and Reasoning from Rules. The brochure gives Mechanical Concepts 20 minutes; prep sites put the whole test at about an hour.
| Jobs | Laboratory, telecommunications, engineering design, drafting, GIS, testing and relay technicians (LG&E and KU); health physics, quality assurance and distribution planning technicians (EEI brochure)ReportedEEI TECH test brochure, hosted by PSEG |
|---|---|
| Graphic Problem Solving | Practical arithmetic on numbers shown in illustrationsReportedEEI TECH test brochure, hosted by PSEG |
| Interpreting Diagrams | Using symbols and codes to find objects on a map or diagram and read their statusReportedEEI TECH test brochure, hosted by PSEG |
| Mechanical Concepts | Mechanical principles; 20-minute limitReportedEEI TECH test brochure, hosted by PSEG |
| Reasoning from Rules | Reading a set of rules and applying them to make decisionsReportedEEI TECH test brochure, hosted by PSEG |
| Length | About an hour, 80 to 91 questions, by prep site estimates that differReported |
Three of the four parts are about reading information off a picture and acting on it exactly. WorkKeys Graphic Literacy is our closest practice for the graphic and diagram parts, and Workplace Documents trains the careful rule reading that Reasoning from Rules rewards. Mechanical Concepts is the same skill as in the CAST.
What about the SO/PD II, meter reader and customer service tests?
The SO/PD II, test #5209, is for system operators, controllers, power dispatchers and gas controllers: Analytic Thinking Skills, Mathematical Usage and Reading Comprehension, scored Recommended or Not Recommended. Meter readers sit a short test of coding and tables, and customer service applicants sit a separate EEI customer service test.
The SO/PD II brochure says the parts are combined into one result. A utility testing site describes Analytic Thinking Skills as several tasks running at once on a screen divided into four; we could not confirm that from EEI, and we have no practice that matches it. The math and reading are like the other batteries, so the IBEW-style test is useful for those.
The meter reader test (MRAB) is reported as under 20 minutes, with coding and reading tables; WorkKeys Graphic Literacy drills table reading. SCE lists a Customer Service Specialist test (#5306) and Duke a CSR test; we have no practice for those.
Which test do lineman apprentices take?
If the utility hires its own line apprentices, usually the EEI CAST. If you are applying to a union outside-line apprenticeship through a JATC, usually the NJATC electrical aptitude test: algebra and functions plus reading comprehension, scored as a stanine from 1 to 9. PacifiCorp asks for a 5 for lineman apprentices.
| Used for | Lineman, estimator and meter technician apprenticeships at PacifiCorp; Groundman Trainee at TVA (electrical training ALLIANCE test)ReportedPacifiCorp, "Electrical aptitude test" (NJATC test, required scores, 91-day retest) |
|---|---|
| Required stanine | Lineman 5, estimator 6, meter technician 7 for Washington, Oregon and northern California openings; 5 in PacifiCorp's general tableReportedPacifiCorp, "Electrical aptitude test" (NJATC test, required scores, 91-day retest) |
| Retake | Every 91 daysReportedPacifiCorp, "Electrical aptitude test" (NJATC test, required scores, 91-day retest) |
| Parts | Algebra and functions; reading comprehensionReported |
This is the one utility-route test where our practice matches the format closely: the IBEW-style aptitude test runs both parts on their reported clocks, and the how-to-pass guide has the pacing and a plan. Stanine requirements vary by local and year, so confirm yours with the JATC.
Do utilities use Ramsay or Bennett mechanical tests?
Some employers of maintenance staff do, but we found no utility careers page that names one, so treat it as possible rather than likely. Ramsay's Mechanical Aptitude Test is 36 items in 20 minutes and its MecTest is a 60-item journey-level maintenance knowledge test; the Bennett BMCT-II is 55 items in 25 minutes.
If your invitation names a Ramsay or Bennett test rather than an EEI battery, our mechanical-style test is built on the Bennett clock, and the Bennett and Ramsay section of our mechanical test guide sets out each test's format from the publishers' listings. The MecTest is a knowledge test of hydraulics, pumps, print reading and maintenance practice, so aptitude practice alone will not cover it.
How long do you wait to retake a utility aptitude test?
It is the utility's rule, not EEI's. NextEra: 30 days between the first three attempts, then four months. Entergy: 30 days, two attempts a year. Duke Energy: every 90 days, and only after applying to another testing job. Ask before you plan around a retake.
| Utility | Published rule | Source |
|---|---|---|
| NextEra Energy | At least 30 days between the first, second and third attempts on the same EEI test, then at least four months before every later attempt | NextEra Energy careers page |
| Entergy | At least 30 days between the first and second attempts on the same EEI test, and no more than two attempts in 12 months | Entergy careers page |
| Duke Energy | A retest every 90 days at most, and only after you apply to another job that requires the test | Duke Energy careers page |
| Arkansas Electric Cooperatives | Reported: at least 15 days between the first and second attempts, and no more than two in 12 months | Arkansas Electric Cooperatives careers page |
| PacifiCorp (NJATC test, not EEI) | A retake every 91 days | PacifiCorp careers page |
| PSEG | Results stay valid indefinitely unless the test standards change or a new testing process is brought in | PSEG careers page |
Read that table as the cost of an under-prepared first try: a month at best, a season at worst, and at Duke a new application before you are even invited back. Entergy and Arkansas Electric Cooperatives also accept a result you earned at another utility through EEI's Authorization to Release form, which is one more reason to make the first attempt count.
Which LifeScore practice fits which part?
Mechanical Concepts is our strongest match. Math, reading and graph-reading parts have close IBEW-style and WorkKeys-style practice. Figural reasoning has a similar test; Assembling Objects only partial; Analytic Thinking and customer service none. None of it is EEI's own items, and our scores do not predict an EEI result.
| EEI part | Our closest free practice | What it does not do |
|---|---|---|
| Mechanical Concepts (CAST, POSS, MASS, TECH) | Our mechanical-style test: levers, pulleys, gears, fluids and circuits with a drawing on almost every question. The POSS brochure's 44 items in 20 minutes is about 27 seconds each, close to our 55 in 25 | Ours is one 25-minute clock, not EEI's 20; the items are ours, not EEI's |
| Mathematical Usage (CAST, POSS, MASS, SO/PD II) | The algebra part of our IBEW-style test (no calculator) and WorkKeys Applied Math for word problems | Neither runs at 18 questions in 7 minutes; drill short timed sets for that pace |
| Reading Comprehension (CAST, MASS, POSS, SO/PD II) | The reading part of our IBEW-style test and WorkKeys Workplace Documents | EEI passages are technical and safety text; ours are similar in kind, not copies |
| Graphic Arithmetic (CAST), Graphic Problem Solving and Interpreting Diagrams (TECH), meter tables | WorkKeys Graphic Literacy: reading the one figure that matters off a chart, table or diagram | Not built on EEI's two-picture format |
| Figural Reasoning (POSS) | Our abstract reasoning test: shape series and odd one out | Shape rules in a similar style; EEI's exact item type is not public |
| Assembling Objects (MASS) | Our spatial reasoning test trains turning shapes in your head | Partial only: we have no "which pieces make this object" items |
| Analytic Thinking Skills (SO/PD II), Reasoning from Rules (TECH), customer service tests | None | Use the utility's or EEI's own practice material |
How should you prepare for a utility aptitude test?
Find out which battery you are on, sit one timed mechanical test and one timed math and reading test to find the weak part, drill that part on short clocks for two weeks, then rehearse with the utility's own EEI practice material. Three weeks of 30 to 45 minutes a day is enough for most people.
| When | What to do |
|---|---|
| Day 1 | Confirm the battery and test date with the recruiter, and download any EEI brochure or practice test the utility links. Then sit the free mechanical-style test, 55 questions in 25 minutes. |
| Days 2 to 3 | Sit the free IBEW-style test (algebra, then reading) without a calculator. You now know your weakest of mechanical, math and reading. |
| Week 1 | Rebuild arithmetic: fractions, percents, ratios and rearranging a formula, in timed sets of 10 at about 25 seconds each, the pace of the CAST's Math Usage. Learn the eight mechanical rules in our guide. |
| Week 2 | Your weakest part daily in short timed sets. Add the battery-specific part: graph reading for CAST and TECH, shape patterns for POSS, spatial work for MASS. |
| Week 3 | Two full timed runs with separate clocks for each part, as EEI times them. Then the utility's own EEI practice test. Rest the day before. |
On the day, guess before each clock runs out: prep sites describe number-correct scoring with no penalty for wrong answers, so a blank is the only sure zero. Read the drawing before the question in mechanical items, circle the numbers you use in graph items, and in reading answer only from the passage. For a fuller method see how to pass a mechanical aptitude test.
Find your weak mechanical topic in 25 minutes
55 original mechanical-style questions with drawings, scored for each topic. Free, no sign-up. Not EEI items.
Start the free Mechanical testFrequently asked questions
What aptitude test do utility companies use?
What is the passing score for the EEI CAST?
How long do I have to wait to retake an EEI test?
Can I use my EEI test score at another utility?
Is a calculator allowed on the EEI tests?
What is the difference between the POSS and the MASS?
Is the lineman apprenticeship test the same as the CAST?
Where can I get official EEI practice tests?
Does Con Edison use EEI tests?
Are LifeScore's tests the real EEI tests?
Math and reading on a clock, for the CAST and the lineman test
5 timed IBEW-style mocks and 8 drills of no-calculator algebra and reading.
The IBEW Pass Pack gives you 5 full mocks on the real clock, 8 drills of 12 questions for the sections that cost you points, and a predictor that turns your mocks into the odds of reaching the target score you set. One payment, no subscription, and your free score stays free.
IBEW-style practice written by LifeScore, not EEI or NJATC items. It matches the NJATC lineman test format and trains the math and reading parts of the EEI tests.
Prep courses for these tests usually cost $19 to $129. The IBEW Pass Pack is US$39 (£29), once.
- 5
- timed mocks
- 8
- topic drills
- 1
- score predictor
Sources
- LG&E and KU careers, "Pre-employment testing" (which EEI test for which job)
- PSEG careers, "Interview and test preparation" (EEI brochures by job)
- PSEG careers, "Quarterly testing" (how long results stay valid)
- EEI CAST test brochure, hosted by PSEG
- EEI POSS test brochure, hosted by PSEG
- EEI TECH test brochure, hosted by PSEG
- EEI MASS test brochure, hosted by LG&E and KU (PDF)
- EEI SO/PD II test brochure, hosted by LG&E and KU (PDF)
- Southern Company Get Into Energy, EEI CAST-R student guide (PDF)
- Southern California Edison, "Pre-employment study guides" (EEI test numbers)
- NextEra Energy careers, "Sample employment test" (EEI tests and retest rule)
- Entergy careers, "Pre-employment testing" (EEI partner, retest rule, Authorization to Release)
- Duke Energy careers, "Employment tests" (EEI batteries, 90-day retest)
- Arkansas Electric Cooperative Corporation, "EEI testing"
- CenterPoint Energy, "EEI testing" (CAST, TECH, SO/PD)
- TVA careers, "Selection testing for operations and maintenance training"
- AEP careers, "Pre-employment test prep"
- Dominion Energy careers, "Pre-employment testing"
- PacifiCorp, "Electrical aptitude test" (NJATC test, required scores, 91-day retest)
- Con Edison, "Power your future: entry level careers" presentation (Council of Industry, PDF)
- EEI, "EEI's employment test batteries" (PDF; we could not open it)
- JobTestPrep, "EEI MASS test" (prep site: section counts and times)
- JobTestPrep, "CAST test" (prep site: Mathematical Usage timing)
- Psychometric Success, "Meter reader aptitude test" (prep site)
Checked 14 November 2026. EEI publishes very little about its tests in public and does not publish pass marks. From our build environment we could not open the utility pages or EEI PDFs directly, so each fact comes from a search result quoting that page; where a figure comes only from a prep site we say so. Utilities change their rules, so confirm yours with the recruiter or the invitation.
Choosing between prep products? Best mechanical aptitude practice tests, compared: nine options scored on one published rubric, with the price per full-length mock and where we lose.
Practising for a specific employer?
- RAF assessmentUK, armed forces
- Royal Navy assessmentUK, armed forces
- Plumber and pipefitter apprentice (UA) assessmentUS, skilled trades
- Ironworker apprentice assessmentUS, skilled trades
- Elevator mechanic apprentice (EIAT) assessmentUS, skilled trades
- Power plant operator (EEI POSS) assessmentUS, skilled trades
- All employer assessmentsWhat each employer states and what candidates report
LifeScore is not affiliated with the Edison Electric Institute (EEI), the electrical training ALLIANCE, the IBEW, NECA, Ramsay Corporation, Pearson or TalentLens, ACT, or any utility named on this page. CAST, CAST-R, POSS, MASS, TECH and SO/PD II are names of EEI tests, used here only to describe them. Our tests are mechanical-style, IBEW-style and WorkKeys-style practice written by LifeScore; they are not EEI items, and our scores do not predict an EEI result.